You are here: Home > Products > Sigma High Capacity Centrifuges > Sigma 4-16

SIGMA 4-16

Spincontrol Comfort No. 10490 (220-240 V, 50/60 Hz),
No. 10491 (208 V, 50/60 Hz),
No. 10492 (120 V, 50/60 Hz),
No. 10493 (100 V, 50/60 Hz)

Spincontrol Professional No. 10495 (220-240 V, 50/60 Hz),
No. 10496 (208 V, 50/60 Hz),
No. 10497 (120 V, 50/60 Hz),
No. 10498 (100 V, 50/60 Hz)

Universal table top centrifuge; speed range up to 13.500rpm
Control unit Spincontrol Comfort or Professional
Various angle and swing-out rotors available
Lid can easily be opened due pneumatic swing support
Maximum capacity of 4 x 500 ml down to microtubes with different adapters in the same bucket
Maintenance-free induction drive motor. A Microcontroller controls speed, time, temperature and gravitational field
Motorized lid lock
Suitable for low sppeds e.g. for cell sedimentation , accuracy +/- 1 rpm
Magnetic rotor identification prevents the rotor from overspeeding
Stainless steel bowl
Imbalance switch
No need to open casing for emergency lid lock release
Produced according to national and international safety regulations (e.g. IEC 1010)

Rotors & Accessories
Technical Specifications
Brochure as pdf file

	Spincontrol Comfort	Spincontrol Professional
Display	Grafik LCD	TFT
Plain text pop up window	+	+
Permanent display preselected, current values	+	+
Languages	D, GB	D, GB
Timer	10sec - 9h 59min	10sec - 9h 59min
Timer after set speed has been reached	-	+
Time increments [sec]	60; 1	60; 1
Short run	+	+
Continous run	+	+
Speed increments [rpm]	100; 1	10; 1
Display speed and g-force	+	+
G-force increments [xg]	10; 1	10; 1
Temperature increments [°C]	1	1
Switchable °C, °F	-	+
Standstill cooling, switchable	+, +	+, +
Standstill heating, switchable	+, +	+, +
Rapid cooling program: Rapid_cool	+	+
Start refused with exceeded temperature tolerance, tolerance preselectable	-	+
Programs	50	60
User defined program name	-	+
Program list shows all parameters	+, +	+, -
Linear acceleration curves	10	10
Quadratic deceleration curves	10	10
User defined acceleration curves	10	10
Linear deceleration curves	10	10
Quadratic deceleration curves	10	10
User defined deceleration curves	10	10
Brakeless	+	+
Combination deceleration a. brakeless from 1000 - 150 rpm selectable	-	+
Auto lid open, switchable	+	+
Accoustic signal, switchable	+, +	+, +
Signal length preselectable	+	+
Optical display stillstand	+	+
Counting cycles centrifuge, each rotor	+, +	+, +
Pop up window end of rotor life time	+	+
Automatic lid opening at the end of the run, switchable	+, +	+, +
All rotors are programmed: speed, g-force, radius	+	+
Max. radius decreasealbe	+	+
Calculation for liquid density >1.2g/cm³	+	+
Start delay	+	+
Controlunit lockable	+	+
Code protection	+	+

Rotors & Accessories for the SIGMA 4-16 centrifuges

Order No.	Description	max. rpm	max. rcf
11118	Swing-out rotor for microtiter plates, incl. 1 set carriers no. 13218, plate holder no. 17978	5.700 1/min	5.013 x g
11150	Swing-out rotor, 4 place, e.g. for buckets no. 13215, 13220	4.500 1/min	4.120 x g
11156	Swing-out rotor, 6 place, e.g. for buckets no. 13127	4.500 1/min	4.324 x g
11234	Swing-out cytology rotor complete, rotor no. 11235, 2 sets buckets no. 13224, 4 inserts no. 15223	3.000 1/min	1.137 x g
12130	Angle rotor 30 x 1.5/2.2 ml, incl. hermetic aluminium lid	13.500 1/min	20.376 x g
12165	Angle rotor 6 x 85 ml, incl. hermetic aluminium lid	12.500 1/min	17.119 x g
12166	Angle rotor 8 x 50 ml, incl. hermetic aluminium lid	12.500 1/min	16.770 x g
12168	Angle rotor 20 x 10 ml, incl. hermetic aluminium lid	12.500 1/min	17.119 x g
12169	Angle rotor for 8 x 50 ml culture, incl. hermetic aluminium lid	12.500 1/min	18.168 x g
12170	Angle rotor for 12 x 15 ml culture, incl. hermetic aluminium lid	12.500 1/min	17.469 x g
12172	Angle rotor 12 x 30 ml, incl. hermetic aluminium lid	12.500 1/min	19.216 x g
12174	Angle rotor for 24 x 15 ml culture, 2 lines with same RCF-value, incl. hermetic aluminium lid	10.500 1/min	15.531 x g
12200	Angle rotor 100 x 1.5/2.2 ml, incl. hermetic aluminium lid	9.000 1/min	14.761 x g
12256	Angle rotor 6 x 250 ml, sealable with hermetic aluminium lid	8.000 1/min	10.375 x g

Accessories

Order No.	Description	Suitable for:
13421	Bucket for microtiter- and deepwellplates, max. height of plates 60 mm, 1 set = 4 pcs.	11650
13450	Round bucket, for the round carrier system Ø 100, for 650 ml tube, max. tube length 140 mm, 1 set = 2 pcs.	11650
13215	Rectangular bucket, sealable with cap no. 17112, max. tube length 115 mm, 1 set = 2 pcs.	11150
13220	Bucket for microtiter plates, max. height of plates 54 mm, 1 set = 2 pcs.	11150
13221	Bucket for microtiter plates, incl. plate holder no. 17979, max. height of plates 56 mm, 1 set = 2 pcs.	11150
13233	Multiple carrier for 50 x tubes approx. 5 ml, max. Ø 12.5 x 70 - 90 mm, 1 set = 2 pcs.	11121, 11123
13234	Multiple carrier for 4 x 100 ml for tubes max. Ø 45 x 92 - 100 mm, incl. rubber cushion no. 16051, 1 set = 2 pcs.	11150
13235	Multiple carrier for 7 culture tubes 50 ml no. 15151, 1 set = 2 pcs.	11150
13236	Multiple carrier for 12 culture tubes 15 ml no. 15115, 1 set = 2 pcs.	11150
13350	Round bucket, for round carriers Ø 85 mm and 500 ml bottles, max. tube length 130m, 1 set = 2 pcs.	11150
13127	Rectangular bucket, for the system of rectangular carriers, max. tube length 115 mm, 1 set = 2 pcs.	11156
13218	Bucket for microtiter plates, incl. plate holder no. 17978, max. height of plates approx. 80 mm, 1 set = 2 pcs.	11118
13021	Adapter for PCR-tube 0.2 ml, e.g no. 15042, 1 set = 2 pcs.	12124
13000	Adapter for reaction vials 0.25/0.4 ml no. 15014, 1 set = 2 pcs.	12124
13002	Adapter for reaction vials 0.5/0.75 ml, Ø 7.9/10 x 28/31 mm, e.g. no. 15005, 1 set = 2 pcs.	12124
17112	Rectangular polysulfone sealing cap, clear, incl. 1 set clips no. 17118, 1 set = 2 pcs.	13127, 13180
17134	Round aluminium sealing cap, 1 set = 2 pcs.	13034, 13550
17350	Round carrier for 24 reaction vials 0.5/0.75 ml, max. Ø 8/10 x 28/31 mm, 1 set = 2 pcs.	13190, 13350
17356	Round carrier for 16 round bottom tubes 5 - 6 ml, max. Ø 13.5/17.5 x 70 - 90 mm, 1 set = 2 pcs.	13190, 13350
17360	Round carrier for 10 culture tubes 15 ml, max. cap Ø 22 mm, 1 set = 2 pcs.	13350, 13550
17385	Round carrier for 1 tube 78 - 85 ml, max. Ø 38/40 x 85 - 115 mm, 1 set = 2 pcs.	13190, 13350
17390	Round carrier incl. rubber cushion no. 16051, for 1 round bottom tube 100 ml, max. Ø 45/50 x 85 - 110 mm, 1 set = 2 pcs.	13190, 13350
17401	Round carrier incl. rubber cushion no. 16250 for 1 round bottom tube 175 - 250 ml, max. Ø 57.5 x 90 - 150 mm, 1 set = 2 pcs.	11150
17347	Round carrier for 1 bottle with flat bottom, 250 ml, max. Ø 61.5 x 90 - 125 mm, 1 set = 2 pcs.	13190, 13350
15500	Polycarbonate bottle 500 ml, Ø 85 x 135 mm, incl. screw cap	13350, 13550
18002	Rectangular carrier for 20 reaction vials 1.5/2.2 ml, max. Ø 11 mm, 1 set = 2 pcs.	13127, 13180
18010	Rectangular carrier for 12 tubes 10 - 12 ml, flat and round bottom, max. Ø 16.8/17.5 x 60 - 85 mm, 1 set = 2 pcs.	13127, 13215
18030	Rectangular carrier for 5 round bottom tubes 27 - 30 ml, max. Ø 25.4/27.5 x 80 - 110 mm, 1 set = 2 pcs.	13127, 13180
18050	Rectangular carrier for 2 round bottom tubes approx. 50 ml, max. Ø 35/38 x 85 - 110 mm, 1 set = 2 pcs.	13127, 13215
18250	Rectangular carrier for 1 tube 175 - 250 ml incl. rubber cushion no. 16051, max. Ø 57 x 90 - 137 mm, 1 set = 2 pcs.	13127, 13215
17108	Polysulfone sealing cap, clear, incl. 2 sets clips no. 17118, 1 set = 2 pcs.	13218, 13845
17118	Clip for sealing caps, 1 set = 2 pcs.	17108, 17112
17978	Plate holder for bucket no. 13218, 1 set = 2 pcs.	13218

Technical specifications

Power supply	220-240 V, 50/60 Hz 208 V, 60 Hz 120 V, 60 Hz 100 V, 50/60 Hz
Power consumption [W]	1.680
Max. capacity [ml]	4 x 500
Max. speed [rpm]	13.500
Min. speed [rpm]	100
Interference suppression	EN 61326
Height x Width x Depth [mm]	489 x 496 x 650
Height with open lid [mm]	940
Weight without rotor [kg]	82
Kinetic energy max. [Nm]	50.486
Noise level at max. speed (approx.) - Rotor 12130 at 13500 rpm - Rotor 11150 at 4500 rpm	73 dB (A) 73 dB (A)
Max. acceleration - Rotor 12130 [sec] - Rotor 12256 [sec]	29 78
Max. deceleration - Rotor 12130 [sec] - Rotor 12256 [sec]	28 108
Temperatur setting range	-; + 70°C*
Min. rotor temperature - Rotor 11150 at 5.100 rpm [°C] - Rotor 12256 at 9000 rpm [°C]	- -

As the officially appointed Sigma centrifuge sales and service specialist within the uk, we have vast experience in the specification, application and installation of their full range of centrifuges and if the model you require is not listed please feel free to contact us on 01939 291200 or by email info@sciquip.co.uk.

Available Sigma Centrifuges

SIGMA 4-16

Rotors & Accessories for the SIGMA 4-16 centrifuges

Accessories

Technical specifications